Simpson BA7.12/18 Top-Flange Hanger for Double 3-1/2 in x 18 in Engineered Wood 12-Ga G90 Galv AE Heavy Angles Cutting Height I1 3/8"

Cutting Height I1 3/8"

ensuring the correct embedment depth and tight tolerances for reliable fastener holding strength

The JTM-1254RVS uses an R-8 spindle taper with a collet capacity range of 1/8 to 1 inch

you can also set and repeat specific bevel angles quickly and consistently across multiple workpieces

Cast-in-place or wet-set installation - bottom of base plate sits flush with concrete for full post bearing

Simpson BA7.12/18 Top-Flange Hanger for Double 3-1/2 in x 18 in Engineered Wood 12-Ga G90 Galv AE Heavy Angles Cutting Height I1 3/8"The Simpson Strong Tie BA7. 12 18 is a top flange joist hanger engineered for use with double 3 1 2 in. x 18 in. engineered wood and solid sawn lumber members. Designed as a cost effective, one piece alternative to welded hangers, the BA series delivers reliable performance across a range of load conditions. This hanger supports medium loads with solid sawn lumber and higher loads when paired with engineered wood products. Its full height joist flange