ignition coil kawasaki zn700 zn 700 1984 1985 Honda XL125 Bottom bearing: 30mm x 55mm

Bottom bearing: 30mm x 55mm x 17mm

This set of forks have been manufactured to replace the original set of fork legs on a YBR125 for the years and models shown above

The shock is 270mm in length from the centre of each pin/bush

If the readings are above what your manual states (commonly no greater than 15 volts but can vary from bike to bike so check your manual) then please remove the rectifier and contact us directly

This steering bearing set has been desinged to replace the factory headstock bearings on a Yamaha XJ700 for the years 1985 & 1986

ignition coil kawasaki zn700 zn 700 1984 1985 Honda XL125 Bottom bearing: 30mm x 55mmBrand new 12V CDI ignition coil to fit: Kawasaki ZN 700 A1 A2 LTD (1984 1985). This coil has been designed to replace OEM 21121 1027 or 21121 1028 on a Kawasaki ZN700 for the years and models shown above. This is a high spec coil and you'll no longer need to run a resistor in the system to use this coil. We also stock the standard 2 to 2. 5 ohms primary coil, please see our other listings for these. It has 100mm mounting points and 2 spade connectors.